Freescale Achieves Design Cycle Reduction and Superior Silicon Predictability With Cadence Model-Based Physical and Electrical DFM Solutions

SAN JOSE, CA -- (MARKET WIRE) -- Jul 28, 2009 -- Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global electronic design innovation, today announced that Freescale Semiconductor has successfully taped out a 45-nanometer networking design using the Cadence "correct-by-design" prevention, analysis, implementation and signoff solution for faster, more predictable time-to-volume production. The flow incorporates the industry's leading model-based design-for-manufacturing (DFM) prevention, analysis and signoff, including Cadence Litho Physical Analyzer, Cadence CMP Predictor, Cadence Litho Electrical Analyzer, Cadence QRC Extraction, and model-based routing optimization with the Cadence® Encounter® Digital Implementation (EDI) System. This seamless methodology demonstrated significantly faster turnaround time compared to traditional DFM solutions and was used to tape out the design to Chartered Semiconductor Manufacturing.

"For high-volume designs using advanced process nodes, we believe it is a key enabler and differentiator to have silicon-accurate analysis and implementation of yield-critical steps such as lithography and CMP," said Kyle Patterson, manager of DFM Technologies at Freescale Semiconductor. "By incorporating Cadence advanced DFM techniques, both physical and electrical, into implementation, we are able to accurately predict manufacturing issues and prevent them from occurring, and with a methodology that takes a fraction of the time compared to traditional DFM methods. Fundamentally, this allows us to accelerate our time-to-market and time-to-volume requirements."

Through collaborations with leading semiconductor companies such as Freescale, Cadence has developed one of the industry's most complete DFM prevention, analysis and signoff methodologies, enabling design-side optimizations that reduce manufacturing risk. Cadence solutions leverage multi-core distributed processing to seamlessly address increasing design cycle and database size increases at 45- and 32-nanometer process nodes and have proven to deliver near-linear scalability. In addition, Cadence Litho Electrical Analyzer is the industry's first electrical DFM (eDFM) solution in production use at leading semiconductor companies from 90 nanometers down to 40 nanometers, and is currently facilitating 32- and 28-nanometer variability-aware library development.

"Our collective vision is to accurately model manufacturing effects and address them during the design phase," said Dr. Kuang-Kuo "K.K." Lin, senior manager of DFM Services at Chartered. "By working with Cadence to develop silicon-accurate DFM models for analysis and digital implementation, we have produced a DFM flow with distinct benefits for Freescale, which results in faster cycle times."

"The design complexity and stringent manufacturing budgets at 45- and 32-nanometers require early three-way collaboration between the customer, the foundry and EDA, beginning at the library level," said Dave Desharnais, group director of Digital Implementation Solutions at Cadence. "We are pleased that our silicon-proven technology has enabled Freescale's design success and look forward to ensuring their continued design closure successes. Cadence will continue to invest to be a leading provider of the entire manufacturability-aware implementation flow."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software and hardware, methodologies, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at www.cadence.com.

Cadence, the Cadence logo, Virtuoso, and Encounter are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

Add to Digg Bookmark with del.icio.us Add to Newsvine

For more information, please contact:
Dan Holden
Cadence Design Systems, Inc.
(408) 944-7457

Email Contact


Featured Video
Editorial
More Editorial  
Jobs
Design Verification Engineer for Blockwork IT at Milpitas, California
Senior Firmware Architect - Server Manageability for Nvidia at Santa Clara, California
Sr. Silicon Design Engineer for AMD at Santa Clara, California
CAD Engineer for Nvidia at Santa Clara, California
Upcoming Events
MEMS & Sensors Executive Congress (MSEC 2024) at Château-Bromont Hotel in Bromont Quebec Canada - Oct 7 - 9, 2024
PCB West 2024 at Santa Clara Convention Center Santa Clara CA - Oct 8 - 11, 2024
DVcon Europe 2024 at Holiday Inn Munich City Center, Munich Germany - Oct 15 - 16, 2024
International Test Conference (ITC) at United States - Nov 3 - 8, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise