UART Example demonstrates how to design a Universal Asynchronous Receiver/Transmitter (UART) controller which is the key component in serial bus communications. The UART takes bytes of data and transmits the individual bits in a sequential fashion. At the destination, a second UART re-assembles the bits into complete bytes. This project contains three transactors: CLK_generator, WriteSerial, and ReadSerial. In this example, the WriteSerial and ReadSerial transactors communicate with each other. They send and receive serial data on a signal named UART. But, they work with parallel data at the transactor level. For example, the write transactor has an eight bit argument which it then converts to serial data. Both of these diagrams also have a parameter named "speed" which controls how many clock cycles are to be used for each bit of data.
You are reviewing the
Resource.
Your machine is locate at 3.144.248.150.
