SEATTLE, WA, April 23, 2018 (GLOBE NEWSWIRE) -- 3DX Industries, Inc. (OTC: DDDX) (the “Company” or “3DX”), has achieved exceptional performance results from its series of production run parts manufactured for use by Alaska General Seafoods (“AGS”). The parts were designed by 3DX for AGS as OEM replacement parts in their seafood canning line and are currently in use at the AGS facility in Alaska. The parts were manufactured using a binder jet additive process, with no post machining required.
“Knowing these parts were going to be used in such a remote location under extreme conditions was a challenge that we were excited to address,” states 3DX President and CEO, Roger Janssen. “Any shutdown in their processing facility due to these parts not meeting OEM standards, was not an option. Knowing the strength of the finished product we were confident it would satisfy the demands placed on these parts.”
Karry Lattig of Alaska General states, “We are very pleased with how these parts have performed during our production seasons. They were in a high contact/high use section of our production line, and they performed beyond what we expected they would. After 2 full seasons under extreme conditions, there is virtually no wear on these parts, which in comparison to the original parts we were using is nothing short of exceptional. There has been no shut down required to remove and replace worn parts using the metal printed parts from 3DX which has not only saved us time, but costs as well. We will continue to use 3DX Industries to supply us with new and replacement parts for our facilities as needed throughout the coming seasons.”
Mr. Janssen adds, “We are very excited with the look, feel and performance of the products being produced using binder additive metal printing. The time and cost savings to our customers continues to be a significant advantage over traditional manufacturing processes.”
3DX uses an additive manufacturing process, otherwise known as three-dimensional printing which materializes an object—or mold for an object—layer by layer out of powdered material, a binding agent and a digital file. The process is also referred to as Binder Jetting Technology.
3DX encourages investors to visit our social media feeds at 3DX TWITTER and 3DX FACEBOOK to see posts of on-going operations and video clips of some of the exciting projects we are working on. Both social media feeds are available from the company’s official website at http://www.3dxindustries.com
About the Company: 3DX Industries, Inc. is focused on the additive metal manufacturing segment within the manufacturing industry. 3DX has the capability of manufacturing a wide variety of products using its 3D metal printing system, 3D composite printing as well as more traditional methods of precision manufacturing. 3DX offers additive and subtractive manufacturing options as well as product design, engineering and assembly services to its customers.
About Alaska General Seafoods: Alaska General Seafoods (AGS) is a socially responsible seafood processing company that purchases fresh seafood from independent fishermen, who harvest their wild catch from sustainable fisheries in a responsible manner from the cold pristine waters of Alaska. AGS produces canned, fresh and frozen seafood and sells to wholesale customers around the world. Our seafood products are manufactured in processing facilities which are certified at the highest levels, by both state and federal regulators and independent food inspection agencies, to ensure our seafood products are wholesome and of high quality.
About Binder Jet: Binder Jetting is a powder bed process, where a binder is used to selectively ‘print’ the desired part shape by adhesively joining the metal particles. After the jetting process, the green part is sintered in a furnace to burn off the binder and then an infiltrant, typically bronze, is melted and drawn into the part to fill in the remaining spaces within the sintered metal powder skeleton to create a dense component. The resulting parts combine properties from both the metal powder and the infiltrant.
Safe Harbor 3DX encourages those interested in our Company to rely only on information included in our filings. Statements released by 3DX Industries, Inc. that are not purely historical are forward-looking within the meaning of the "Safe Harbor" provisions of the Private Securities Litigation Reform Act of 1995, including statements regarding the company's expectations, hopes, intentions, and strategies for the future. Investors are cautioned that forward-looking statements involve risk and uncertainties that may affect the company's business prospects and performance. The company's actual results could differ materially from those in such forward-looking statements. Risk factors include but are not limited to general economic, competitive, governmental, and technological factors as discussed in the company's filings. The company does not undertake any responsibility to update the forward-looking statements contained in this release.
Visit the 3DX Industries, Inc. web site at www.3dxindustries.com. Information included on the Company's website is not incorporated herein by reference or otherwise.
For additional information please contact: 3DX Industries, Inc. 6920 Salashan Parkway Suite D-101 Ferndale WA 98248 Telephone: 360-366-8858 Email: info @ 3dxindustries.com