WALTHAM, Mass., Aug. 27, 2024 (GLOBE NEWSWIRE) -- Markforged Holding Corporation (NYSE: MKFG), the company strengthening manufacturing resiliency by enabling industrial production at the point of need, today announced the FX10 Metal Kit, a print engine that brings metal printing capability to the FX10. With this kit, the FX10 becomes the world’s first industrial 3D printer that can print both metal filaments and composites with continuous fiber reinforcement.
“Customers no longer have to choose between a metal and a composite printer. Years of R&D investment and field experience have come together to provide an all-in-one solution for 3D printing to provide immediate return on investment once installed on a factory floor,” said Shai Terem, CEO of Markforged. “The FX10 supercharges other equipment on the factory floor to be better utilized and run more efficiently, increasing productivity and reducing potential line down events.”
The FX10, released in November 2023 as a composite only printer, was designed to be the most versatile tool on the factory floor and has received tremendous feedback from early customers. With its modular architecture, upgrades like the Metal Kit enable customers of the FX10 to gain additional value from the machine after purchase.
Markforged also announced a new 316L stainless steel metal filament to be used with the FX10 Metal Kit. Users will also be able to print in 17-4PH with additional support for other Markforged metal filaments in the future.
“We designed the FX10 to be a modular platform, so that we are able to release new innovations and upgrades without customers having to purchase a new printer every year,” said Terem. “Along with new software capabilities we release regularly, the FX10 Metal Kit is poised to provide continuously growing value on factory floors for years to come.”
The FX10 Metal Kit consists of a swappable print engine that includes a metal-specific print head, material feed tubes, routing back, and dual pre-extruders. An FX10 can be swapped between metal and composite as many times as needed, and the swap takes about 15 minutes.
Similar to the 5th Generation Continuous Fiber Reinforcement (CFR) print system in the FX10 that prints nearly twice as fast as previous composite printers, the 2nd Generation Metal FFF engine, built on years of Markforged’s experience printing metal, prints significantly faster than previous Markforged metal systems. FX10 combines faster print speed with a print volume twice as large compared to Markforged’s prior industrial metal printers.
Metal prints are built from the metal filament and a ceramic release filament. The ceramic release is extruded as an interface between the part and supports for ease of separation and removal. Once metal prints are complete, they must be washed and sintered in Markforged’s Wash-1 and Sinter-2 solutions. Eiger, Markforged’s slicer and print management software automates the process, including scaling parts to account for shrinkage during sinter.
The Digital Forge is the additive manufacturing platform that enables every aspect of the FX10 and is purpose-built to integrate into existing manufacturing ecosystems. With the Digital Forge, users can share parts across their organization, and monitor fleet performance from a central location.
Markforged will showcase the FX10 Metal Kit at the International Manufacturing Technology Show in Chicago, Illinois from September 9-14 at booth 432305 where it will be printing in both continuous fiber reinforced composites and metal.
About Markforged
Markforged (NYSE:MKFG) is enabling more resilient and flexible supply chains by bringing industrial 3D printing right to the factory floor. Our additive manufacturing platform The Digital Forge allows manufacturers to create strong, accurate parts in both metal and advanced composites. With over 10,000 customers in 70+ countries, we’re bringing on-demand industrial production to the point of need. We are headquartered in Waltham, Mass where we design the hardware, software and advanced materials that makes The Digital Forge reliable and easy to use. To learn more, visit www.markforged.com.
Special Note Regarding Forward-Looking Statements
This press release contains forward-looking statements that are based on beliefs and assumptions and on information currently available. In some cases, you can identify forward-looking statements by the following words: “may,” “will,” “could,” “would,” “should,” “expect,” “intend,” “plan,” “strategy,” “anticipate,” “believe,” “estimate,” “predict,” “project,” “potential,” “continue,” “ongoing,” “opportunity” or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words. These statements involve risks, uncertainties and other factors that may cause actual results, levels of activity, performance or achievements to be materially different from the information expressed or implied by these forward-looking statements. Although Markforged believes that it has a reasonable basis for each forward-looking statement contained in this press release, Markforged cautions you that these statements are based on a combination of facts and factors currently known by it and its projections of the future, about which it cannot be certain. Forward-looking statements in this press release include, but are not limited to, statements regarding the impact of the newly-announced FX10 printer on the manufacturing industry and Markforged, statements related to product development and innovation, and statements regarding the potential benefits to consumers of Markforged products including, but not limited to, the FX10 printer; our ability to fulfill orders for our products in a timely fashion in the future; expected growth of the size of and opportunity to increase our addressable market; the timing of launches and the rate and extent of adoption of our products, including, but not limited to, our most recently introduced products; market trends in the manufacturing industry; the effects of macroeconomic factors; and the benefits to consumers, functionality and applications of Markforged’s products. Markforged cannot assure you that the forward-looking statements in this press release will prove to be accurate. These forward looking statements are subject to a number of risks and uncertainties, including, among others, general economic, political and business conditions; the ability of Markforged to maintain its listing on the New York Stock Exchange; the effect of uncertainties related to economic downturns and global supply chain disruptions on Markforged’s business and financial results; the outcome of any legal proceedings against Markforged; and those factors discussed under the header “Risk Factors” in Markforged’s most recent periodic and other filings with the SEC. Furthermore, if the forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that Markforged will achieve its objectives and plans in any specified time frame, or at all. The forward-looking statements in this press release represent Markforged’s views as of the date of this press release. Markforged anticipates that subsequent events and developments will cause its views to change. However, while Markforged may elect to update these forward-looking statements at some point in the future, Markforged has no current intention of doing so except to the extent required by applicable law. You should, therefore, not rely on these forward-looking statements as representing Markforged’s views as of any date subsequent to the date of this press release.
Contact Information
Media:
Samuel Manning
Principal Public Relations Manager
sam.manning@markforged.com
