LIVE WEBINAR: How to enforce HDL coding standards and gain the overall design review to meet DO-254 objectives

Aldec
                                                          LogoHow to enforce HDL coding standards and gain the overall design review to meet DO-254 objectives

Presenter: Janusz Kitel, DO-254 Program Manager at Aldec
Thursday, July 2, 2020

Abstract:

The RTCA/DO-254 guidance recommends applicants to define and enforce HDL coding standards. The task starts at the planning process including standard definition, a method how it will be enforced, and in case the process will be automated, how the tool or results will be assessed.

Defining the coding standard is not a trivial task since there is no well-defined and official standard mentioned in the RTCA/DO-254 guidance document. The major question is how a detailed review of the HDL code must be done? Is it enough to enforce the minimum number of well-known best coding practices or we should go deeper into the synthesis phase, design constraints and even clock domain crossing analysis? Such a decision must be made with awareness that the coding standard is not the only DO-254 objective related to the design review.

During this webinar we will show the benefits of using ALINT-PRO™ to enforce the coding standard and to streamline the overall design review to meet DO-254 objectives.

Agenda: 

  • Coding Standard for DO-254 Projects
  • Automatic and Manual Design Reviews
  • Enforcing Coding Standard with ALINT-PRO
  • Gaining Design Review with Detailed FSM and CDC Analysis
  • Tool Assessment and Qualification
  • Live Demo

Event Info                                                                 

EU Session
 3:00 PM – 4:00 PM CEST
 Thursday, July 2, 2020

Register for EU Session

US Session
 11:00 AM – 12:00 PM PT
 Thursday, July 2, 2020

Register for US Session

Presenter                                                                 

Janusz
                                                                                                                    Kitel

Bio:

Janusz Kitel is a DO-254 Program Manager at Aldec. He is responsible for FPGA level in-target testing technology and requirements lifecycle management for DO-254 and other safety-critical industry standards. Janusz has 7 years of experience in requirements engineering and over 12 years of experience in product quality assurance. Janusz received his M.S. in Electronics and Telecommunication from Silesian University of Technology and increased his knowledge around software engineering from complementary studies at AGH University of Science and Technology (Poland). His practical engineering experience includes the areas of functional verification, DO-254 compliance and software development and he has held a wide range of engineering positions that include Application Engineer, Software Developer and Project Manager.


View On Demand Webinar
View Upcoming Webinars


Aldec is a global industry leader in Electronic Design Verification and offers a patented technology suite including: RTL Design, RTL Simulators, Hardware-Assisted Verification, Embedded, SoC and ASIC Prototyping, Design Rule Checking, CDC Verification, IP Cores, DO-254 Functional Verification and Military/Aerospace solutions.


Aldec
                                                                                                                    Logo
Featured Video
Jobs
Senior Firmware Architect - Server Manageability for Nvidia at Santa Clara, California
GPU Design Verification Engineer for AMD at Santa Clara, California
CAD Engineer for Nvidia at Santa Clara, California
Sr. Silicon Design Engineer for AMD at Santa Clara, California
Design Verification Engineer for Blockwork IT at Milpitas, California
Senior Platform Software Engineer, AI Server - GPU for Nvidia at Santa Clara, California
Upcoming Events
Phil Kaufman Award Ceremony and Banquet to be held November 6 at Hayes Mansion at Hayes Mansion 200 Edenvale Ave San Jose CA - Nov 6, 2024
SEMICON Europa 2024 at Messe München München Germany - Nov 12 - 15, 2024
DVCon Europe 2023 at Holiday Inn Munich – City Centre Munich Germany - Nov 14 - 15, 2024
SEMI MEMS & Imaging Sensors Summit, at International Conference Center Munich Germany - Nov 14, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise