OmniVision's Automotive SoC Offers Rear and Surround View Cameras Industry's Best Low-Light Performance, Lowest Power and Smallest Size

In Combination With 120dB HDR, Low Noise and ASIL B Functionality, Single-Chip Image Sensor and Signal Processor Enables Best Image Quality and Smallest Modules for Automotive Viewing Cameras

SANTA CLARA, Calif., Sept. 17, 2019 — (PRNewswire) — OmniVision Technologies, Inc., a leading developer of advanced digital imaging solutions, today announced from the AutoSens conference its 1.3MP OX01F10 SoC, providing automotive designers with the industry's best imaging performance across a wide range of challenging lighting conditions, along with the most compact form factor and lowest power consumption. In a single, 1/4" optical format package, the OX01F10 integrates a 3.0 micron image sensor and an advanced image signal processor (ISP), solving the automotive rear view camera (RVC) and surround view system (SVS) challenges of achieving a small form factor with excellent low-light performance, ultra-low power and reduced cost while improving reliability by using only one printed circuit board (PCB).

OmniVision’s Automotive 1.3MP OX01F10 SoC Offers Rear and Surround View Cameras Industry’s Best Low-Light Performance, Lowest Power, and Smallest Size. By Combining OmniVision's proprietary DCG (Dual Conversion Gain) and PureCel®Plus Technologies, It Solves Automotive Imaging Design Challenges While Improving Reliability by Using Only One Printed Circuit Board (PCB).

"Analysts predict that SVS and RVC will continue to hold the majority share in the automotive camera market, with over 50% of the total market volume through 2023. SVS, in particular, is expected to double its growth between now and 2023 due to increased customer adoption," said Andy Hanvey, director of automotive marketing at OmniVision. "Our OX01F10 SoC provides the best option for automotive designers responding to this growing consumer demand for better RVCs, along with the expansion of SVS into the mainstream market. Additionally, this SOC's functional safety features allow module providers to create a single platform for both the viewing cameras and the machine vision applications that require ASIL B."

OmniVision's dual conversion gain (DCG) technology is employed in this SoC to achieve a high dynamic range of 120dB with only two captures, as opposed to three required by the competition, which minimizes motion artifacts while reducing power consumption and boosting low-light performance. Its integrated ISP further enables superior image quality with a number of advanced features, such as:

  • Lens chromatic aberration correction
  • Advanced noise reduction and local tone mapping
  • Optimizations for the on-chip image sensor's PureCel®Plus technology

PureCel Plus technology is renowned for its low-light sensitivity, providing an industry best SNR1 of 0.19 lux. This results in the OX01F10 performing better than the competition across challenging lighting conditions, enabling the ability to eliminate unnatural halos from LEDs and to provide better contrast on bright days.

The OX01F10 features <300mW typical power consumption, which is 30% lower than competitors and significantly reduces temperature. In fact, this is the only imaging device today that does not require a metal heat sink, allowing for the use of plastic camera module bodies to reduce costs. With its compact package size, it also enables smaller cameras that can fit in much tighter spaces. In addition, by integrating both the image sensor and ISP into a single chip, designers can save on both cost and space by eliminating the second PCB in typical two-chip implementations.

This SoC provides 1.3MP resolution and a 1340x1020 array size at 30 fps, which offers ample resolution for calibration. It also enables output flexibility with both 2-lane MIPI and 10-bit DVP interfaces.

The OX01F10 SoC is AEC-Q100 Grade 2 certified and samples are available now. It will be demonstrated at OmniVision's AutoSens conference booth #29 in Brussels, September 17-19, 2019. For more information, contact your OmniVision sales representative: www.ovt.com/contact-sales.

About OmniVision
OmniVision Technologies, Inc. is a leading developer of advanced digital imaging solutions. Its award-winning CMOS imaging technology enables superior image quality in many of today's consumer and commercial applications, including mobile phones; security and surveillance; automotive; tablets, notebooks, webcams and entertainment devices; medical; and AR, VR, drones and robotics imaging systems. Find out more at www.ovt.com.

OmniVision®, PureCel®, and the OmniVision logo are trademarks or registered trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.

 

OmniVision logo. (PRNewsFoto/OmniVision Technologies, Inc.)

Cision View original content to download multimedia: http://www.prnewswire.com/news-releases/omnivisions-automotive-soc-offers-rear-and-surround-view-cameras-industrys-best-low-light-performance-lowest-power-and-smallest-size-300919430.html

SOURCE OmniVision Technologies, Inc.

Contact:
Company Name: OmniVision Technologies, Inc.
Media Contact: Eric Lawson, Kiterocket
Phone: +1 408.276.9572
Email Contact Company Contact: Mengxi Liu, OmniVision Technologies, Inc.
Phone: +1 408.653.3484
Email Contact
Web: http://www.ovt.com

Featured Video
Jobs
Currently No Featured Jobs
Upcoming Events
Consumer Electronics Show 2025 - CES 2025 at Las Vegas Convention Center NV - Jan 7 - 10, 2025
ESD Alliance "Savage on Security” Webinar at United States - Jan 23, 2025
SEMICON Korea 2025 at Hall A, B, C, D, E, GrandBallroom, PLATZ, COEX, Seoul Korea (South) - Feb 19 - 21, 2025
DVCon U.S. 2025 at United States - Feb 24 - 27, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise