Cutting-edge technologies and solutions being demonstrated include Flex Ethernet, 400ZR, 100GbE, 400GbE, Open ROADM SDN and 100G Coherent Transceivers

20 February 2019 -- SAN DIEGO -- In an industry where open networking is increasingly valued by network and data center operators, and networks continue to grow and diversify with the advent of 5G and IoT, it is critical that technologies can interoperate to enable next-generation infrastructure.

Taking place 3-7 March 2019 at the San Diego Convention Center,  OFC 2019 will serve as the platform for several live multivendor interoperability demonstrations. Technologies featured in the demos include FlexE (Flex Ethernet), 400ZR, 10 Gigabit Ethernet (GbE), 25GbE, 50GbE, 100GbE, 400GbE; Open Source Open ROADM SDN Controller; pluggable CFP2-ACO and CFP2-DCO modules; and Common Electrical I/O (CEI)-112G.

“The exhibit floor at OFC is the ideal venue for vendors and open source community representatives to demonstrate the interoperability of their technologies and how they can be implemented into network and data center operators’ infrastructure,” said Jörg-Peter Elbers, ADVA Optical Networking SE, Germany, and OFC General Co-Chair. “The technologies being demonstrated by these groups represent the latest advancements and their interoperability is vital to driving our industry forward.”

All interoperability demonstrations are located throughout the exhibit floor and will feature technology from approximately 40 companies. Details on the demonstrations are as follows:

Coherent Transceiver Demo, Booth #6421

This demonstration will show live interoperability of pluggable CFP2-ACO and CFP2-DCO modules from multiple vendors (Acacia, Fujitsu Optical Components and Lumentum) operating at 100Gbps. The modules will be plugged into a white box switch from Edgecore, and transmit and receive HD-FEC coded 100Gbps DP-QPSK optical signals traversing optical fiber over distances covering data center interconnects. This demonstration is being coordinated by NTT Network Innovation Laboratories.

Ethernet Alliance Ethernet Demo, Booth #4749

The Ethernet Alliance will display an interoperable multivendor next-gen technology demo that will encompass 10 Gigabit Ethernet (GbE), 25GbE, 50GbE, 100GbE and 400GbE technologies and solutions from 18 companies, ranging from interconnect providers, to switches and routers, to test and measurement equipment. The Ethernet Alliance will also showcase a live 400GbE infrastructure connecting multiple booths on the show floor. The Ethernet Alliance is also celebrating the success of those companies winning the Ethernet Alliance Holy Cup Challenge, for their successful first public demonstration of transmitting 100GbE per lambda. Join the celebration at a Wednesday afternoon social in their booth. 

OIF Demos, Booth #6215

This year’s OIF booth will feature live multi-vendor interoperability demonstrations showcasing its work in the industry’s hottest areas - Common Electrical I/O (CEI)-112G, FlexE (Flex Ethernet) and 400ZR. The live demos with 13 system vendors, component vendors and test equipment vendors will demonstrate critical insight into how key technologies interoperate within the industry’s ecosystem. OIF is celebrating 20 years of advancing new technologies and interoperability work effecting progressive change in the industry, visit the booth for more information. Check the status of OIF’s current work  here.

Open ROADM MSA SDN Demos, Booth #6139

This demo will use an open optical layer (Open ROADM MSA compliant) to turn up a wavelength with an Open Source Open ROADM SDN Controller, transfer a large number of Virtual Machines from one data center to another data center over this wavelength using a master orchestrator and turn down the optical connection afterwards. The demo is a collaboration of the University of Texas, Dallas, with Ciena, Fujitsu, Orange and AT&T. It will also demonstrate other Open ROADM MSA compliant hardware from ECI, Infinera and Juniper.

OFC 2019, where the technology powering our communications networks today is showcased, is expected to draw more than 15,000 executives, technical experts, academia, media and analysts.

OFC hosts thousands of conference sessions and programming spanning more than just optics – including in-depth coverage of photonic integrated circuits, optical networking, advanced digital-signal processing, quantum optics, emerging application of optics in 5G, new computing, data center infrastructure and so much more.

ATTENDEE REGISTRATION: Attendees may register by visiting  ofcconference.org . Admittance to the exhibit hall is free with Exhibits Pass Plus Registration.  Learn more.  

MEDIA REGISTRATION: Media/analyst registration for OFC 2019 can be accessed  online. Further information is available on the event website at  OFC, including travel details.
 
About OFC

The Optical Fiber Conference and Exhibition ( OFC) is the largest global conference and exhibition for optical communications and networking professionals. For more than 40 years, OFC has drawn attendees from all corners of the globe to meet and greet, teach and learn, make connections and move business forward.
 
OFC includes dynamic business programming, an exhibition of more than 700 companies, and high impact peer-reviewed research that, combined, showcase the trends and pulse of the entire optical networking and communications industry. OFC is managed by The Optical Society (OSA) and co-sponsored by OSA, the IEEE Communications Society (IEEE/ComSoc), and the IEEE Photonics Society. OFC 2019 will be held from 3-7 March 2019 at the San Diego Convention Center, California, USA. 



Contact: 

Leah Wilkinson
Wilkinson + Associates for OFC
703-907-0010
Email Contact