X-Ray Solutions
ZEISS acquired a majority stake in Italian X-ray provider Bosello HT to offer a broader spectrum of CT solutions for customers. The BOSELLO SRE MAX 2D industrial radioscopic system will be on display showing inline and atline inspection solutions for the automotive and aerospace industry. The technology increases the level of quality in the inspection of aluminum cast parts. 3D X-Ray CT measurements for complete internal and external part insights will be demonstrated on the ZEISS METROTOM. We will also highlight high resolution 3D X-Ray microscopy with the ZEISS Xradia Versa.
Entry Level to Ultra Precision CMMs
A broad range of systems will be highlighted at the show, including the latest addition to the ZEISS CMM lineup. Ideal for measuring small, intricate parts, the MICURA CMM from ZEISS with active scanning and submicron accuracy now includes a model with an even larger measuring range. The new system can handle bigger parts with a 40 percent larger measuring range of 500 x 700 x 500 millimeters and has a machine-mounted controller, saving floor space. ZEISS MICURA comes with the VAST XT gold or the VAST XTR gold active scanning sensor. Angled features are best suited for the VAST XTR gold sensor. Its integrated swivel joint enables the stylus system to turn as far as possible in 15 degree increments and thus always positions the stylus in the direction of the feature being measured.
2D and 3D Measurements
From 2D profile projectors to 3D scanners to multisensor CMMS, the full range of optical solutions can be found at the main ZEISS booth. And it is now possible to inspect sensitive, reflective or low-contrast surfaces more quickly than ever before with the ZEISS O-INSPECT multisensor coordinate measuring machine. We will be demonstrating the new ZEISS DotScan chromatic-confocal white light sensor on the ZEISS O-INSPECT CMM.
The ZEISS DotScan sensor can be swapped in and out as needed, saving a lot of time and increasing flexibility. The sensor is available in three sizes for different measuring ranges: one, three and ten millimeters. In November 2018, all new ZEISS O-INSPECT multisensor measuring machine systems will come standard with an interface to use the new sensor.
Inline. Atline. Offline.
Two robotic systems will be the centerpiece of the main ZEISS booth, allowing attendees to get up-close demonstrations of the latest automated inspection solutions. ZEISS is a one-stop partner for systematic quality assurance in car body construction, from measurement and inspection technology to the fixtures up to quality data management and service. Get maximum quality and productivity with integrated ZEISS technology.
Roughness, Contour and Form Inspection
Form and surface measuring systems seamlessly integrate into the range of industrial measuring technology from ZEISS. There is a wide range of stand-alone machines and a sensor dedicated to a CMM, ZEISS ROTOS. The new sensor enables the use of CMMs to completely inspect surface waviness and roughness – even on complex workpieces, all in a single measurement run without any reclamping. This cutting-edge innovation simplifies and speeds up the measurement of all surface parameters from the drawing in a single measurement cycle. Programming the surface parameters is quick and easy because the ZEISS ROTOS is completely integrated in CALYPSO, the ZEISS measuring software. Surface roughness can be analyzed and visualized in a customized, professional display, together with size, form and location in ZEISS PiWeb reporting. A new line of portable, entry-level surface roughness systems with a large touch screen, SURFCOM TOUCH, will also be on display.
Inspection, Analysis and Reporting
ZEISS CALYPSO, the easy-to-use metrology software, works with the ZEISS portfolio of coordinate measuring machines, optical systems, computed tomography machines and more. The same tools and capabilities for inspection are available, no matter the application. CALYPSO 2018 will be on display and the new version gives customers over 100 new functions to further enhance their quality inspection processes. PiWeb reporting, built into CALYPSO 2018, has been enhanced with new features, plus more user-friendly functions for the growing optical product line, efficiency improvements for curve measurements and testing of parts families, and new characteristics calculations.
Be sure to stop by the ZEISS booths, East Building, 135502 and 135655 for free learning sessions on these systems throughout the week. All booth visitors also have a chance to register to win ZEISS gear! To learn more and register visit www.zeiss.com/imts-2018
For more product information visit www.zeiss.com/metrology or call 1-800-327-9735.
About ZEISS
ZEISS is an internationally leading technology enterprise operating in the fields of optics and optoelectronics. The ZEISS Group develops, produces and distributes measuring technology, microscopes, medical technology, eyeglass lenses, camera and cinema lenses, binoculars and semiconductor manufacturing equipment. With its solutions, the company constantly advances the world of optics and helps shape technological progress. ZEISS is divided up into the four segments Research & Quality Technology, Medical Technology, Vision Care/Consumer Products and Semiconductor Manufacturing Technology. The ZEISS Group is represented in more than 40 countries and has over 50 sales and service locations, more than 30 manufacturing sites and about 25 research and development centers around the globe.
In fiscal year 2016/17 the company generated revenue approximating €5.3 billion with around 27,000 employees. Founded in 1846 in Jena, the company is headquartered in Oberkochen, Germany. Carl Zeiss AG is the strategic management holding company that manages the ZEISS Group. The company is wholly owned by the Carl Zeiss Stiftung (Carl Zeiss Foundation).
Further information is available at www.zeiss.com
Industrial Metrology
The Industrial Metrology business group is a leading manufacturer of multidimensional metrology solutions. These include CMMs, optical and multisensor systems, and metrology software for the automotive, aircraft, mechanical engineering, plastics and medical technology industries. Innovative technologies such as 3D X-ray metrology for quality inspection round off the product portfolio. The business group additionally offers a broad global spectrum of customer services with measuring houses and competence centers close to its customers. The Industrial Metrology business group is headquartered in Oberkochen. Production and development sites outside Germany are located in Minneapolis in the USA, Shanghai, China and Bangalore, India. The business group is allocated to the Research & Quality Technology segment. Around 6,300 employees work for the segment, generating revenue totaling €1.5 billion in fiscal year 2016/17.
View original content with multimedia: http://www.prnewswire.com/news-releases/zeiss-shows-new-quality-control-inspection-solutions-at-imts-2018-300702863.html
SOURCE ZEISS Industrial Metrology
Contact: |
Company Name: ZEISS Industrial Metrology
For media inquiries contact: Janelle Gregerson, Carl Zeiss Industrial Metrology, LLC (763) 744-2409 Email Contact Web: http://www.zeiss.com |