Toshiba Electronic Devices & Storage Corporation Starts Sample Shipment of Constant-Current 2-Phase Stepping Motor Driver for Automotive Applications

TOKYO — (BUSINESS WIRE) — October 12, 2017Toshiba Electronic Devices & Storage Corporation has launched “TB9120FTG,” a constant-current 2-phase stepping motor driver for automotive applications. The new IC outputs a sine-wave in electric current using only a simple clock input interface, with no need for an advanced functional MCU or dedicated software. Sample shipments start in November, with mass production scheduled to start in July 2019.

This press release features multimedia. View the full release here: http://www.businesswire.com/news/home/20171012005558/en/

Toshiba Electronic Devices & Storage Corporation: A constant-current 2-phase stepping motor driver " ...

Toshiba Electronic Devices & Storage Corporation: A constant-current 2-phase stepping motor driver "TB9120FTG" for automotive applications. (Photo: Business Wire)

TB9120FTG incorporates DMOS FETs with low on-resistance (upper + lower = 0.7Ω (typ.)), which achieve a maximum current of 1.5A. Both the DMOS FETs and the controller that generates micro-stepping sine-waves (supporting up to 1/32 steps) are housed in a small QFN type package (6.0 mm x 6.0 mm). The new IC delivers an operating temperature range of -40 to 125℃, and it will be qualified against AEC-Q100, a certified standard for electronic components for automotive applications. It is suited to a wide range of general uses, including adjusting the projection of heads-up displays and various valve controllers.

Main Features of New Product

  • Simple clock input interface
    - Advanced functional MCU or software are not required to output sine-waves.
  • Micro step drive, supporting up to 1/32 steps.
    - Less motor noise
    - Smoother and more precise control
  • Stall[1] detection circuit
    - A detection signal is output from a dedicated pin after detecting a stall.
  • Constant-current PWM control
    - Mixed decay mode ensures stable current flow through the motor.
  • Built-in error detections with a warning signal output function
    - Thermal shutdown, over-current detection, and load open detection

Main Applications

  • Mirror adjustment for the projection position of heads-up displays
  • Control of various valves
 

Main Specifications

 
Part number   TB9120FTG
Driving method Constant-current PWM control
Stepping mode Micro step drive, supporting up to 1/32 steps
Number of drive motors Single 2-phase stepping motor
On resistance

Upper + Lower = 0.7 Ω (typ.) at 25 ℃

Output current 1.5 A (absolute maximum rating)
Error detections

Stall detection, thermal shutdown, over-current
detection, and load open detection

Operating voltage range 7V to 18V (absolute maximum rating = 40V)
External power supply Single power supply
Operating temperature range

-40 to 125℃

Package P-VQFN28-0606-0.65

6.0mm x 6.0mm

Wettable pins with excellent solderability

Reliability Qualified based on AEC-Q100
Sample shipment November 2017
Mass production   July 2019 (scheduled)
 

1 | 2  Next Page »
Featured Video
Jobs
Senior Platform Software Engineer, AI Server - GPU for Nvidia at Santa Clara, California
GPU Design Verification Engineer for AMD at Santa Clara, California
Design Verification Engineer for Blockwork IT at Milpitas, California
Sr. Silicon Design Engineer for AMD at Santa Clara, California
CAD Engineer for Nvidia at Santa Clara, California
Senior Firmware Architect - Server Manageability for Nvidia at Santa Clara, California
Upcoming Events
SEMICON Japan 2024 at Tokyo Big Sight Tokyo Japan - Dec 11 - 13, 2024
PDF Solutions AI Executive Conference at St. Regis Hotel San Francisco - Dec 12, 2024
DVCon U.S. 2025 at United States - Feb 24 - 27, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise