Samsung and Mentor Expand Calibre DFM Offering for Mutual Customers

WILSONVILLE, Ore., May 24, 2017 — (PRNewswire) — Mentor, a Siemens business, today announced the addition of the Calibre® DFM Explorer flow control tool, created by Mentor for use by Samsung Electronics and its foundry customers as an extension to the complete suite of Calibre design for manufacturing (DFM) products that are part of Samsung's mandatory sign-off requirements. The Calibre DFM Explorer tool is used by customers who have designs that require DFM applications running across multiple CPUs to achieve target turnaround times. By providing a single interface for the application of multiple DFM processes and the review of results, the Calibre DFM Explorer tool simplifies the signoff process flow for greater efficiency during this time-critical stage.

Mentor Graphics logo. (PRNewsFoto/Mentor Graphics Corporation) (PRNewsFoto/MENTOR GRAPHICS CORPORATION)

Samsung's foundry customers can now access the entire Calibre DFM suite as part of Samsung's sign-off solutions. The required suite includes Calibre LFD™ lithography hotspot detection, Calibre YieldAnalyzer random and systematic process variability analysis, Calibre Pattern Matching automated layout enhancement and reliability analysis, and Calibre YieldEnhancer advanced fill solutions and automated via optimization. The Calibre DFM offering is part of Samsung's Closed-Loop DFM solution that makes designs more robust against process variability. Since the introduction of its Closed-Loop DFM process, Samsung has seen over 10% increases in initial yields.  

As the latest addition to the joint Samsung-Mentor offering, the Calibre DFM Explorer tool controls access to a customer's load-sharing facility (LSF), in which multiple remote machines can be used to run multiple tool flows in parallel, using either local CPU or LSF grid resources. Designers using the Calibre DFM Explorer tool have a single convenient user interface to set up runs and track the progress of jobs. The Calibre DFM Explorer tool automatically handles job submission, monitoring, and results reporting. If any issues are found, the designer can invoke a Calibre RVE™ session from the Calibre DFM Explorer tool to review the error results and implement the necessary changes.

"The Calibre DFM Explorer tool can improve the turnaround time of design signoff through efficient operation of the DFM signoff process," said Jaehong Park, senior vice president of the Foundry Service Team at Samsung Electronics. "By bringing all of these DFM operations into a single environment, not only it is easier and faster to analyze designs for multiple signoff DFM issues, but our customers can be assured that they would receive maximum efficiency from their computing resources."

With the broadest, most accurate, and best-performing DFM solution in the industry, Mentor enables designers to augment their physical and electrical design verification with an expansive set of lithographic, yield, and critical feature analysis capabilities to optimize product printability, robustness, and reliability. This extension enables designers to attain the full benefit of Samsung's world class manufacturing capabilities.

"Samsung Foundry understands the impact that Calibre DFM solutions have in improving manufacturing and yield ramp of world-class products," said Michael Buehler-Garcia, senior director of marketing for Calibre Design Solutions in the Design-to-Silicon division of Mentor. "By working together to develop an optimized environment to specifically assist analysis of large-chip DFM issues, we enable our mutual customers to best leverage Samsung Foundry's unique process offerings via Calibre's production-proven DFM capabilities."

Contact for journalists
Mike Santarini
Phone: 510-354-7322; E-mail: mike_santarini@mentor.com

Mentor Graphics Corporation, a Siemens business, is a world leader in electronic hardware and software design solutions, providing products, consulting services, and award-winning support for the world's most successful electronic, semiconductor, and systems companies. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. Website: http://www.mentor.com.

Mentor Graphics, Mentor and Calibre are registered trademarks and LFD is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/samsung-and-mentor-expand-calibre-dfm-offering-for-mutual-customers-300462719.html

SOURCE Mentor, a Siemens business

Contact:
Mentor, a Siemens business
Samsung
Web: https://www.mentor.com

Featured Video
Jobs
Senior Firmware Architect - Server Manageability for Nvidia at Santa Clara, California
Senior Platform Software Engineer, AI Server - GPU for Nvidia at Santa Clara, California
Design Verification Engineer for Blockwork IT at Milpitas, California
GPU Design Verification Engineer for AMD at Santa Clara, California
Sr. Silicon Design Engineer for AMD at Santa Clara, California
CAD Engineer for Nvidia at Santa Clara, California
Upcoming Events
Phil Kaufman Award Ceremony and Banquet to be held November 6 at Hayes Mansion at Hayes Mansion 200 Edenvale Ave San Jose CA - Nov 6, 2024
SEMICON Europa 2024 at Messe München München Germany - Nov 12 - 15, 2024
DVCon Europe 2023 at Holiday Inn Munich – City Centre Munich Germany - Nov 14 - 15, 2024
SEMI MEMS & Imaging Sensors Summit, at International Conference Center Munich Germany - Nov 14, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise