TOKYO — (BUSINESS WIRE) — April 16, 2017 — Toshiba Corporation's (TOKYO:6502) Storage & Electronic Devices Solutions Company today announced the launch of “TB67S111PG,” a multi-channel solenoid and a unipolar motor driver IC that achieves high-voltage and low ON resistance drive. Sample shipments start today, with mass production scheduled to start in May.
This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20170416005028/en/
Toshiba: "TB67S111PG," a multi-channel solenoid and a unipolar motor driver IC that achieves high-voltage and low ON resistance drive. (Photo: Business Wire)
TB67S111PG incorporates four channels of each low-side MOSFET and regenerative common diode. This enables it to control all output MOSFETs independently and realizes a design that is suited to driving the solenoids and unipolar motors widely used in such applications as amusement equipment (pachinko and slot machines), home appliances (air-conditioners and refrigerators) and industrial equipment (vending machines, banking terminals such as ATMs, office automation equipment and factory automation equipment).
Fabricated with the latest high-voltage analog power process, BiCD 130nm, the motor driver IC achieves an output rating of 80V and reduces IC heat generation by lowering the output ON resistance [1] to 0.25Ω.
The IC is packaged in a high heat dissipation H-frame DIP package that can be mounted on low-cost paper phenol board and on a general glass-epoxy board.
Main Features of New Product
1. Four
channels of each low-side MOSFET and regenerative common diode
This
allows all output MOSFETs to be controlled independently. The IC is
suited to multi-channel solenoid drives and unipolar motor drives.
2. High voltage (80V) and low ON resistance (0.25Ω) drive
High-voltage
(80V) MOSFET in the output block provides support for solenoid and
unipolar motor drives. Heat generation during motor operation can be
reduced by low ON resistance (0.25Ω).
3. Lead insert type package (DIP)
The H-frame DIP package, which
has high heat dissipation, supports diverse consumer and industrial
applications.
4. Built-in error detections with automatic reset functions
A
thermal shutdown circuit and overcurrent shutdown circuit protect the IC
when abnormalities occur in set usage, and automatically reset IC
operation after a specified time.
Main Specifications of New Product |
||||
Part number | TB67S111PG | |||
Function |
Multi-channel solenoid/ Unipolar driver |
|||
Package | DIP16-P-300-2.54A | |||
Input |
Control I/F | Full parallel input (CMOS) | ||
VM power supply
|
45V (max) | |||
Output |
Output rating
|
80V (max) | ||
Output rating
|
1.5A per channel (max) | |||
Output ON
|
0.25Ω (typ.) | |||
Common diode | Built in | |||
Other features |
- Built-in error detection circuits (thermal shutdown and overcurrent shutdown) - Built-in automatic reset function after error detection - Built-in thermal shutdown flag output function - Supports the power-on sequence by the single power drive |
|||
Mass production | May 2017 (scheduled) |