Toshiba Starts Mass Production of System Power Supply ICs for Medium-Sized LCD Modules for Car Navigation Systems

TOKYO — (BUSINESS WIRE) — June 4, 2015Toshiba Corporation's (TOKYO: 6502) Semiconductor & Storage Products Company today announced the start of mass production of “TC7735FTG”, a system power supply IC with 5 different voltage power outputs, for the medium-sized LCD modules typically used in car navigation systems.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20150604005487/en/

Toshiba: System power supply IC "TC7735FTG" for medium-sized LCD used in car navigation systems (Pho ...

Toshiba: System power supply IC "TC7735FTG" for medium-sized LCD used in car navigation systems (Photo: Business Wire)

The IC integrates an automatic buck-boost DC-DC converter, which provides stable power supply to LCD panels with a wide operating voltage range, from 4.5 to 16V. This feature supports power supply directly connected from car batteries and suits car navigation systems.

The IC integrates an OTP memory[1], allowing it to store different power control set-up data adjusted for each LCD module, removing the need for adjustment of the system by external control.

Key Features

  • 5 built-in power outputs.
  • Wide operating voltage range, from 4.5 to 16V.
  • Selectable switching frequency: built-in oscillator (1MHz) or external clock input (400kHz-1.2MHz)
  • Automatic buck-boost converter that identifies input voltage and selects operation mode (buck or boost), eliminating control by external command.
  • Built-in OTP for adjustable power control of each LCD
  • Safety functions: input under-voltage detection; Input over-voltage detection; thermal shutdown; and output over-voltage detection

Application examples

LCD modules for car navigation systems and digital photo frames

 

Main Specifications

 
Part Number   TC7735FTG
Operating Temperature   Topr -40 to 85 degree C
Operating Voltage Vin 4.5 to 16V
Setting Built-in OTP write Output voltage

Power sequence

Output Voltage Range CH1:Automatic Buck-Boost DC-DC converter 5V to 15V
CH2: Buck DC-DC converter 3V to 5V
CH3: Positive charge pump 14V to 22V
CH4: Negative charge pump -5V to -15V
Operational amplifier for VCOM 0.5 to 7.5V (Vout1-0.6V max)
* Vout1 is output voltage of CH1
Package   QFN32pin(5mm x 5mm)
 

1 | 2  Next Page »
Featured Video
Jobs
CAD Engineer for Nvidia at Santa Clara, California
Senior Firmware Architect - Server Manageability for Nvidia at Santa Clara, California
Sr. Silicon Design Engineer for AMD at Santa Clara, California
Design Verification Engineer for Blockwork IT at Milpitas, California
GPU Design Verification Engineer for AMD at Santa Clara, California
Senior Platform Software Engineer, AI Server - GPU for Nvidia at Santa Clara, California
Upcoming Events
Phil Kaufman Award Ceremony and Banquet to be held November 6 at Hayes Mansion at Hayes Mansion 200 Edenvale Ave San Jose CA - Nov 6, 2024
SEMICON Europa 2024 at Messe München München Germany - Nov 12 - 15, 2024
DVCon Europe 2023 at Holiday Inn Munich – City Centre Munich Germany - Nov 14 - 15, 2024
SEMI MEMS & Imaging Sensors Summit, at International Conference Center Munich Germany - Nov 14, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise