TOKYO — (BUSINESS WIRE) — May 14, 2015 — Toshiba Corporation (TOKYO:6502) today announced the launch of “TB9051FTG”, a small-sized motor driver IC for DC brushed motors[1] intended for automotive electronic throttle control. “TB9051FTG” offers highly efficient operation and a small P-QFN28 package (6mm x 6mm), realized by its ultra-low on-resistance, the result of applying DMOS[2] transistors as driver circuits. Sample shipments will start in September 2015, with mass production scheduled to start in October 2016.
Toshiba: small-sized motor driver IC "TB9051FTG" for DC brushed motors intended for automotive electronic throttle control. (Photo: Business Wire)
While primarily targeting vehicle engine applications, such as electronic throttle and valve control, the new device can be also suitable for the control of on-board systems operating at up to 5A, such as control of wing mirrors and trunk locks.
Toshiba has also carried out a range of functional safety analyses to simulate various system failures and will provide customers with documentation to support safety analysis and design.
“TB9051FTG” will be showcased at the AUTOMOTIVE ENGINEERING EXPOSITION (Yokohama 2015) and the TECHNO-FRONTIER 2015 to be held in Japan from May 20 to 22.
Key Features
1. Low on-resistance
Ultra-low
on-resistance (H + L-side: 0.34Ωmax) is realized by applying DMOS[2]
transistors as driver circuits in an IC fabricated with cutting-edge
process technology.
2. Small flat package
The small flat package (P-QFN28-0606-0.65) is
realized by the ultra-low on-resistance. Suited for small mounting
boards.
3. Various failure detection circuits for functional safety
Built-in
detection circuits include over current, over heat, low voltage and high
voltage.
Applications
Automotive engine
applications: Electronic throttle control, valve control
Other
automotive on-board systems operating up to 5A: Control of wing mirrors
and trunk locks.
Main Specifications |
||
Part Number | TB9051FTG | |
Channels | 1ch(H-Bridge) | |
On Resistance(+/-3.0A,
|
0.34Ω(H-side+L-side, max) | |
Motor Functions | Forward / Reverse / Brake | |
Other Functions |
PWM control / Current limit control / H-side current monitor
/ Diagnosis output / Power On Reset (POR) circuit |
|
Detection Circuits | Over Current/Over Heat/Low Battery Voltage(VBAT)/Low VCC/High VCC | |
Operating Voltage Range | VBAT=4.5V to 28V, VCC=4.5V to 5.5V | |
External Power Supply | 2 Power Supplies (VBAT,VCC) | |
Package | P-QFN28-0606-0.65 | |
Sample Availability | September 2015 | |
Mass Production | October 2016 |