New ZL30169 High Performance, Ultrasmall Form Factor Supports the Deployment of 100G Coherent Optical Networks for Demanding Bandwidth Growth

ALISO VIEJO, Calif., Nov. 20, 2014 — (PRNewswire) —  Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced its new ZL30169 high performance Optical Transport Network (OTN) clock translator fully compliant with the ITU-T G.8251 standard that ensures interoperability and satisfactory network performance. The ultrasmall, three-input, three-output any-rate-to-any-port clock translator for OTN provides output clocks with industry-leading jitter performance of 250fs RMS, ideal for 100G coherent optical networks.

According to market research firm Infonetics, 100Gb/s is the next speed of choice in 2015 to 2030 with greater than $10 billion in revenue expected by 2018, mostly from service providers. In CY13, the number of 100G ports shipped quintupled to 70,000. The new 100G coherent technology enables transport of 100G data rate across long distances, up to 2500km.

"100G coherent technology is being rapidly adopted by carriers because of its spectral efficiency and reach. This triggers the need to support more flexible client rates with stringent jitter requirements," said Maamoun Seido, vice president and business unit manager of Microsemi's timing products. "Our highly flexible ZL30169 line card device meets these requirements."

The ZL30169 integrates a digital phase locked loop (DPLL), analog PLL (APLL) and EEPROM into an ultrasmall 5x5mm 32-pin QFN package. The APLL generates the ultralow jitter output clocks programmable to any frequency from 1Hz to 1035MHz, the first device of its kind offering such a wide range. With programmable loop bandwidth from 14Hz to 500Hz, the DPLL accepts any input frequency from 1kHz to 1250MHz and provides hitless reference switching, holdover and jitter filtering. The EEPROM provides automatic self-configuration of the device at start-up. The ZL30169 has the critical features such as dynamic rate conversion for forward error correction used in OTN transport and switching applications. The ZL30169 meets all the jitter and wander requirements that are specified in the ITU-T G.8251 Recommendation to ensure satisfactory network performance.

The ZL30169 also offers Numerically Controlled Oscillator (NCO) mode in which output frequencies can be controlled with very high resolution (better than 0.01ppb) by system software. This capability provides a cost-effective solution for customers designing their own Mapper with FPGAs to replace large, expensive, fixed-frequency voltage-controlled oscillators (VCXOs).

About the ZL30169
The ZL30169 device supports multiple client rates such as GE, 10GE, SONET/SDH, SyncE, Fibre Channel, CPRI and digital video transmission. Key features include:

• Three inputs, two differential/CMOS, one CMOS
• Any input frequency from 1kHz to 1250MHz (1kHz to 300MHz for CMOS)
• Inputs continually monitored for activity and frequency accuracy
• Any output frequency from <1Hz to 1035MHz
• Output jitter is typically 0.16 to 0.25ps RMS (12kHz to 20MHz integration band)
• Precise output alignment circuitry and per-output phase adjustment
• Per-output enable/disable and glitch-less start/stop (stop high or low)

The easy-to-use evaluation software generates configuration scripts to be stored in internal EEPROM or to be run on a system processor. For more information on Microsemi's ZL30169, visit http://www.microsemi.com/products/timing-and-synchronization/otn-timing/zl30169.

Availability
The ZL30169 is available now. For questions and additional information, contact Email Contact.

Microsemi's Synchronous Ethernet Line card devices
The ultrasmall form factor, ultralow jitter line card PLL, ZL30151, is available for Telecom and Synchronous Ethernet specific applications. For more information, visit http://www.microsemi.com/products/timing-and-synchronization/synchronous-ethernet/zl30151.

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,400 employees globally. Learn more at www.microsemi.com.

Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its new ZL30169 high performance Optical Transport Network (OTN) clock translator fully compliant with the ITU-T G.8251 standard that ensures interoperability and satisfactory network performance, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO

SOURCE Microsemi Corporation

Contact:

Microsemi Corporation Richard Round, Sr. Manager, Marketing Communications, 949.380.6135, Beth P. Quezada, Communications Specialist, 949.380.6102, Email: Email Contact Web: http://www.microsemi.com