TOKYO — (BUSINESS WIRE) — September 29, 2013 — Toshiba Corporation (TOKYO:6502) today announced the launch of TB9043FTG, a multi-output system power supply IC that incorporates multiple DC-DC converters and series regulators1 for general automotive applications. Sample shipments start today, with mass production scheduled to start in October 2014.
Toshiba: "TB9043FTG", a multi-output system power supply IC for general automotive applications (Photo: Business Wire)
The growth of highly sophisticated automotive applications requires
microcontrollers that operate with low power and high current. This
increases the need for power supply IC incorporating DC-DC convertors
with the high electrical efficiency required to reduce overall power
consumption. TheTB9043FTG integrates two channels of DC-DC converters
and two channels of low noise series regulators, and can drive
microcontrollers that require a 1A class large current load.
The IC
also integrates a wide variety of monitoring functions and outputs
monitoring status, which helps to contribute to improved safety of
automotive applications, under ISO26262, the increasingly important
standard for automotive functional safety.
Key Features of the New Product
1. Built-in 2 channels of DC-DC converters (1
output)
One Dc-DC converter generates 6V power supply from a
car battery; and the other converter generates 1.2V, 1.5V or 3.3V
(selectable) for the microcontroller core from the 6V supply.
2. Built-in 2 channels of series regulators (2
outputs)
The two series regulators independently generates
5V supplies out of 6V supply from DC-DC converter: 400mA current
capacity is used for the microcontroller, and 100mA current capacity is
used for a sensor or other interface.
3. Integrated monitoring functions
The
product incorporates dual circuits for overheating detection and
overcurrent limiter to secure continued operation in the even one
circuit malfunctions.
The IC also integrates output voltage
detector, and terminal for monitoring normal frequency.
4. Small package
The product adopts
small HQFN52 package.
Main Specifications |
||
Part number | TB9043FTG | |
Mass Production Volume | 3 million pieces per year | |
Channels |
Built-in 2-channel DC-DC converters
Built-in 2-channel LDOs |
|
Stop Mode | 0μA (typ) when power supply is cut | |
Operating Voltage Range | +7 to 18V | |
Operating Temperature Range | -40 to 125°C | |
Current Capability | Equipped with multi-output power supply in one IC to realize current capability of 1A class. | |
Safety Functions | A variety of built-in monitoring and detecting functions for safety. | |
Detection Circuits |
・Output voltage detector (overvoltage and undervoltage) and
diagnostic circuit
・Inrush current limiter, IC thermal shutdown circuit ・Watchdog timer (independent 2 circuits) ・Power-on reset ・Frequency monitor |
|
Package | HQFN52 (8mm x 8mm x 0.9mm) | |