Additive manufacturing systems from EOS rapidly gaining market acceptance
Novi, Mich., Feb. 19, 2013—Until recently, laser sintering of parts and implants for dental units was uncommon. Today the technology is on its way toward widespread acceptance: EOS, the technology and market leader for design-driven, integrated e-Manufacturing solutions for Additive Manufacturing (AM), estimates that in the past six years about fifty million laser-sintered dental crowns, copings, and bridges have been created in over 60 direct metal laser-sintering (DMLSTM) systems worldwide. In some countries, EOS’ market share for metal (primarily cobalt chrome) dental units is 80 to 100 percent.
EOS will be discussing this trend at LAB DAY CHICAGO 2013 (held at the Sheraton Chicago Hotel & Towers, Feb. 22-23), illustrating the market transition with a display of crowns, copings, bridges, titanium implants, and plastic dental models—all made using laser sintering.
In addition, at LAB DAY, EOS will provide a sneak peak of its partial application. EOS and its partners in the dental industry are currently working on manufacturing a certified cobalt chrome partial that will officially debut at the International Dental Show (IDS) in Cologne, Germany this March. In plastic laser sintering, EOS has recently rolled out its new FORMIGA P 110, a system suitable for making dentition models out of a specially customized polyamide, PA 2105. Such models are required where ever intraoral scanners are used.
Laser sintering will produce even more dramatic changes to the dental market in the decades ahead. “Our present product line supporting lost wax is probably going to be obsolete in ten to fifteen years,” predicts Bill Oremus, president of Rhode Island-based BEGO USA, a division of 113-year-old German dental giant BEGO GmbH. “The end of casting is approaching as the application of additive manufacturing to dentistry begins to alter the landscape.”
The high quality, durability, and cost-effectiveness of laser-sintered products led BEGO USA to purchase an EOSINT M 270 two years ago. “The U.S. market is primed to take advantage of the cost and time savings that additive manufacturing can provide,” Oremus says.
“Any lab that uses our DMLS system at or near capacity to make dental units can get the best cost-to-part ratio in the industry,” says Thomas Thiel, a Medical Dental Technologist and an engineer in EOS’ dental applications division. “With DMLS, you can make 450 copings and bridges in a day, whereas a dental technician using lost wax casting might make 20.”
During the LAB DAY show, Thiel is presenting two sessions of an accredited clinic titled, “Producing Bridges, Copings, Partials, Implants and Models from CAD Data via Laser Sintering.” In them, he explains how to produce units for crowns and bridges using a DMLS system running unattended. He also discusses the manufacture of implants, the new partial application with DMLS, and the use of plastic laser sintering to make models.
These clinics are approved for 1.5 Scientific Certified Dental Technician credits. There are two sessions, both on Saturday in Parlor G, Lobby Level, at 1:30-3:00 p.m. and 4:00-5:30 p.m. For more information regarding these clinicals, contact EOS at 248-306-0143 x8104.
For additional information on LAB DAY CHICAGO, go to http://www.lmtmag.com/lmtlabday
About EOS
Founded in 1989 and headquartered in Germany, EOS is the technology and market leader for design-driven, integrated e-Manufacturing solutions for additive manufacturing (AM, or “Industrial 3D Printing”). EOS offers a modular solution portfolio including systems, software, materials and material development as well as services (maintenance, training, specific application consulting and support). As an industrial manufacturing process it allows the fast and flexible production of high-end parts based on 3D CAD data at a repeatable industry level of quality. As a disruptive technology it paves the way for a paradigm shift in product design and manufacturing. It accelerates product development, offers freedom of design, optimizes part structures, and enables lattice structures as well as functional integration. As such, it creates significant competitive advantages for its customers. For more information please visit www.eos.info.
Contacts
EOS Electro Optical Systems GmbH
Claudia Jordan
Public Relations Specialist
Phone: +49 (0) 89 893 36 x2134
e-mail: Email Contact
EOS of North America, Inc.
Electro Optical Systems
Jessica Nehro
Field Marketing Manager
Phone: +1 248 306 0143 x8104
Fax: +1 248 306 0298
e-mail: Email Contact
Parker Group (editorial US)
Nick O’Donohoe
Phone: +1 401 272 1510
e-mail: Email Contact
