-- Enables smallest and lowest cost 3G/HSDPA basestation
-- Competes with UMA and VoWiFi
picoChip announced today a reference design for an ultra-low cost 3G/HSDPA basestation for use in a home or small office as an alternative to WiFi and UMA (Unlicensed Mobile Access). The PC8208 modem reference design for a 3G access point or "femtocell" basestation supports HSDPA with a software upgrade to HSUPA. The reference design enables an OEM to develop a femtocell with the lowest bill of materials and fastest time-to-market of any solution available today. Such a system enables cellular operators to counter competitors offering UMA or voice-over-WiFi (VoWiFi), but - a crucial difference - allows customers to use existing standard cellular handsets.
The picoChip Node B software reference design provides a modem that is fully compliant to 3GPP Rel5 2005-06 (FDD) for 4 users with a 200m range, and supports 7Mb/s High-Speed Downlink Packet Access (HSDPA). Software upgrade to HSUPA will be available next year. The reference design includes all baseband processing (sample rate, chip rate and symbol rate operations), as well as MAC-hs scheduler, operations and management (OAM) functionality and protocol termination. It complements picoChip's other proven reference designs for advanced wireless systems, including the industry-standard solution for WiMAX basestations.
Mobile operators increasingly perceive a threat from the convergence of WiFi, VoIP and fixed telephony within the home, and are seeking a way to increase their share of the residential calls market. The femtocell or home-basestation supports cellular calls locally, and then uses broadband, typically DSL or cable modem, to carry traffic to the operator's core network. Crucially, as a standard 3G basestation, it operates with all existing handsets rather than requiring customers to upgrade to expensive dual-mode devices. This provides cellular carriers with an effective means of countering the threat of VoIP, UMA or VoWiFi. As the same handset is used for all calls, it improves customer loyalty and reduces churn, as barriers to changing operators increase. An additional benefit is that both network coverage and capacity are increased in a cost-effective manner, exactly where they are most needed by the end user.
From the customer's perspective a home basestation offers the benefit of using a single mobile handset with a built-in personal phonebook for all calls, whether from home or elsewhere. This eliminates user frustration caused by changing between handsets with different interfaces and functionality.
"Small basestation designs proposed by other vendors have taken a different approach," commented Doug Pulley, Chief Technical Officer of picoChip. "They use designs originally intended for a macrocell application, wholly inappropriate for this environment. The picoChip architecture is specifically optimized for this important new application, and provides the fastest and lowest cost route for OEMs to develop a residential access point."
The PC8208 is the latest addition to the picoChip family of reference designs for 3G basestation applications. The PC8218 picocell and PC8228 microcell designs were both announced and demonstrated last year.
Product information: PC8208 femtocell
Specification:
-- 200m range
-- 10km/h mobility
-- 4 users
-- Residential/ small office
Downlink:
-- 7.21Mb/s (between 4 users), or
-- 4 user Circuit switched data (Release4), or
-- 4 users at 12.2kb/s (voice)
Uplink:
-- Future upgrade to HSUPA, or
-- 4 user Circuit switched data (Release4), or
-- 4 users at 12.2kb/s (voice)
Editor's Note: picoArray is a registered trademark of picoChip. All other trademarks and servicemarks are the property of their respective owners.
Further information:
http://www.picoChip.com
http://www.publitek.com
About picoChip
picoChip, located in Bath, England, is dedicated to providing innovative, flexible wireless solutions to help equipment makers minimize time-to-market, costs, and system power consumption.
The heart of the company's offering is a scaleable, multi-processor baseband IC that combines the computational density of a dedicated ASIC with the programmability of a traditional high end Digital Signal Processor. This radically reduces both development time and materials cost and enables the strategic goal of the "Software Defined Radio". The company has the most comprehensive reference designs in the industry, with complete, standard-compliant solutions for both UMTS (including HSDPA) and WiMAX (802.16d upgradeable to 802.16e). http://www.picochip.com
Contact:
picoChip Designs Limited Rupert Baines, +44 (0)1225 469 744 Email Contact or Publitek Limited Oliver Davies, +44 (0)1225 470 000 Email Contact