World’s Smallest CSP MEMS Oscillator from SiTime Paired with Mini GPS Receiver from Telit to Enable New Wave of Ultra-Miniature Tracking and Navigation Devices
[ Back ]   [ More News ]   [ Home ]
World’s Smallest CSP MEMS Oscillator from SiTime Paired with Mini GPS Receiver from Telit to Enable New Wave of Ultra-Miniature Tracking and Navigation Devices

SiTime's SiT15xx family of 32 kHz oscillators to extend Telit's Jupiter SE880 GPS receiver hibernation periods at 15µA while maintaining snap start to less than a second

RALEIGH, N.C. – December 18, 2013 –  Telit Wireless Solutions, a global provider of high-quality machine-to-machine (M2M) solutions, products and services and Sunnyvale, California based  SiTime Corporation, an analog semiconductor company that is revolutionizing the timing market, today announced that together - Telit’s Jupiter SE880 and SiTime’s SiT15xx oscillators - have enabled the world’s smallest and lowest power GPS receiver with extended hibernation periods at 15µA while maintaining Snap Start to less than one second. SiTime’s SiT15xx family of microelectromechanical system (MEMS) silicon oscillators overcomes the limitations of crystal quartz-based devices in several ways. SiTime’s devices offer area savings of 85%, cut power by 50% and are 15 times more reliable, all of which enable smaller, lower power and longer lasting tracking and navigation devices together with Telit’s Jupiter SE880 miniature GPS receiver.

Battery powered electronic devices like trackers and personal navigation systems use hibernation techniques to extend battery life which entail shutting down the functional blocks with the highest current drain and switching them to the lowest power suspend/sleep state whenever possible. However, during the low-power state, the system’s always-ON 32 kHz Lo-clock continues to draw battery power. The low 750 nA core current and unique power saving features of the 32 kHz SiT15xx family, such as programmable output frequency and output drive swing level, can dramatically lower system power consumption compared to traditional crystal clocks. Additionally, crystal clocks drift over time and over temperature requiring systems to wake up more frequently to correct system clocks and maintain systems in hot start conditions. With ± 100 PPM over the entire industrial temperature range, SiT15xx devices are 2 to 3 times more stable than crystal devices. This reduces the need for systems to wake up and further lowers power consumption. The SiT15xx family operates from 1.2V to 3.63V for regulated power supplies or from 2.7 to 4.5V for unregulated Li-Ion batteries. SiT15xx oscillators offer the smallest footprint in 1.5x0.8 mm chip-scale package (CSP) and eliminate the need for external capacitors.

Telit’s miniature 4.7x4.7mm LGA (Land Grid Array), SiRFstarIV™-based Jupiter SE880 receiver module not only employs leading heterogeneous 3D integration technology, but also provides ways and means for utilizing the latest star products in the fast evolving TCXO and 32kHz technologies. This enables receiver designs that are best in class in performance and all other dimensions critical for regular or size-constrained GPS applications. Its state of the art RF front-end employs spatially calibrated waveguide-quality radio paths inside the three-dimensional space of its architecture drastically reducing system noises and parasitic impedances characteristic of traditional 2-D RF designs. Inside, a multi-filter system includes not only the traditional SAW filters typical in GPS receiver designs but also a 2.4 GHz notch-filter capable of nullifying the jamming effects of high-energy radio devices such as Wi-Fi hot-spots, Bluetooth systems, cordless phones, and others, which greatly affect a GPS receiver’s ability to resolve timid satellite signals in the hostile radio environment where they need to operate.

“SiTime has re-invented the timing industry with silicon MEMS timing solutions that overcome the limitations of quartz and dramatically improve customers’ designs with higher performance, lower power and smaller size. Our ultra-stable SiT15xx family of 32 kHz oscillators is extending these benefits to the fast-growing mobile market” said Piyush Sevalia, executive vice president of marketing at SiTime. “We are pleased to collaborate with Telit on their low-power GPS modules. SiTime’s 32 kHz oscillators offer 2 to 3 times better stability than quartz oscillators – which allows more precise control of hibernation and standby modes, and greatly improves system power consumption. This is one more example of how SiTime’s MEMS and analog leadership is making it possible for our customers to deliver unprecedented performance.”

“Wearable technology is an emerging application area in general particularly for geo-location,” said Mike Ueland, senior vice president and general manager of Telit Wireless Solutions North America. “Every square millimeter reduced in footprint on a miniature GPS receiver enables countless new products that could not have been imagined or developed before.”

With over a decade of exclusive focus on M2M, reducing technical risk and shortening time to market for OEMs and integrators, Telit is the industry’s ONE STOP. ONE SHOP. We leverage M2M’s broadest portfolio in cellular, short range and positioning technologies paired with m2mAIR services covering application enablement as well as mobile network and internet/cloud sides of connectivity. Telit products and services are delivered with global support and logistics exceeding exacting requirements from customers large and small. Now innovate!

About SiTime
SiTime Corporation, an analog semiconductor company, is revolutionizing the $5B timing market with silicon MEMS timing solutions that replace legacy quartz products. With 80% market share and over 175 million devices shipped, SiTime is driving the electronics industry to use 100% silicon-based timing.
 
SiTime’s configurable solutions enable customers to differentiate their products with higher performance, reduced size and better reliability. The rich feature set and flexibility of our solutions allows customers to consolidate their supply-chain, reducing cost of ownership and time to market. By using standard semiconductor processes and high volume plastic packaging, SiTime offers the best availability and shortest lead times in the industry.
 
Top-tier manufacturers are experiencing these benefits and recognize SiTime as The Smart Timing Choice™.

About Telit
Telit Wireless Solutions (AIM: TCM listed under Telit Communications PLC), is a global enabler of machine-to-machine (M2M) communications providing cellular, short range and positioning modules; and through its business unit m2mAIR, M2M managed and value added services, in application enablement and connectivity including mobile network side and cloud. Telit is M2M’s top one-stop-shop offering synergistic hardware and value added services bundles along with low-entry cost PaaS for rapid application development. With over 12 years exclusively in M2M, the company constantly advances technology through seven R&D centers around the globe; marketing products and services in over 80 countries.

By supplying scalable products interchangeable across families, technologies and generations, rapid prototyping tools for application development, and m2m tailored connectivity, Telit is able to curb development costs, protect design investments and reduce technical risk. The company provides customer support and design-in assistance through 32 sales and support offices, a global distributor network of experts with over 30 competence centers, and the Telit Technical Support Forum.

Telit provides all products services and facilities to connect organizations to the Internet of Things (IoT) allowing them to wirelessly collect, process and respond to real-world data from connected devices, creating new efficiencies, revenue streams, societal and personal benefits. Join the conversation and learn more about Telit and its customers’ innovative applications on Facebook and Twitter.



Contact:

Piyush Sevalia
Executive VP,
Marketing
SiTime Corporation
+1-408-331-9138
Email Contact

Alexander Bufalino
SEVP Global Marketing
Telit Wireless Solutions
+39-040-4192-200
Email Contact