Optimized for low power operation at 1.8V, the LDS6000 and LDS6020 consume less than 200uW in full power mode, enabling implementation of capacitive touch in portable devices without the need for low power modes that introduce latency between the first-touch and system touch recognition. The LDS6000 features 15 touch sensor inputs, while the LDS6020 offers up to 13 touch sensor inputs with integrated keypad LED driver functionality.
The LDS6020 enables a high degree of flexibility by allowing up to eight of the 13 touch sensor inputs to be configured as keypad LED drivers capable of driving up to 8mA each, with 16mA available by connecting a single LED to two driver outputs. True current control in 0.25mA increments insures high LED-to-LED brightness consistency, with up to 32 dimming steps enabling smooth transitions between the on and off states. A high-side LED driver architecture allows for isolation from the system battery and a common cathode LED connection to system ground, improving system reliability and ESD performance compared to low-side architectures. Each LED driver may be associated with a different touch sensor input, allowing for automatic, host-less activation of an LED when a touch event occurs.
"We're pleased to introduce the first two members of our new family of PureTouch™ capacitive touch controllers targeted at button, slider, and scroll inputs," said Eric Itakura, Director of Business Development for Touch Technology at Leadis. "With industrial design advantages and high reliability, capacitive touch is gaining traction across multiple product segments, spanning the most portable of applications such as mobile handsets to non-mobile applications such as home appliances. Leadis offers industry-leading low power consumption with the option for integrated visual feedback to address this rapidly growing market."
About the LDS6000
The LDS6000 is a programmable touch controller for use with capacitive sensor arrays implementing touch-based input controls including sliders, scroll wheels, and buttons. Featuring 15 sensor inputs, the LDS6000 provides fast update rates of 2ms per sensor input with on-chip automatic calibration logic continuously monitoring the environment to adjust ambient baseline levels to increase touch accuracy.
The device operates with a 1.8V supply voltage and consumes less than 200uW of power in full power mode. Both SPI-compatible and I2C-compatible interfaces are supported with a general-purpose input/output (GPIO) and interrupt output for additional communication with the host processor. The LDS6000 is packaged in a 4mm x 4mm 28ld TQFN package with maximum thickness of 0.8mm.
About the LDS6020
The LDS6020 is a programmable touch controller with integrated keypad LED drivers for use with capacitive sensor arrays implementing touch-based input controls including sliders, scroll wheels, and buttons. Featuring 13 sensor inputs, the LDS6020 provides fast update rates of 2ms per sensor input with on-chip automatic calibration logic continuously monitoring the environment to adjust ambient baseline levels to increase touch accuracy.
Eight of the 13 sensor inputs are configurable as LED drivers capable of driving up to 8mA of current, with 16mA available for a single LED by connecting to two LED drivers simultaneously. LED dimming may be configured over various transition times, with 32 dimming steps available at maximum current drive. Automatic activation of LED with a valid touch event is achieved by associating an LED driver to a sensor input, alleviating the need for the host processor to turn on the LED.
The device operates with a 1.8V supply voltage and consumes less than 200uW of power in full power mode. Both SPI-compatible and I2C-compatible interfaces are supported with a general-purpose input/output (GPIO) and interrupt output for additional communication with the host processor. The LDS6020 is packaged in a 4mm x 4mm 28ld TQFN package with maximum thickness of 0.8mm.
For more information, visit www.leadis.com.
About Leadis Technology, Inc.
Leadis Technology, Inc., headquartered in Sunnyvale, California, designs, develops and markets analog and mixed-signal semiconductors that enable and enhance the features and capabilities of portable and consumer electronics devices. Leadis' product offerings include color display drivers, which are critical components of displays used in portable consumer electronic devices; LED drivers, which provide controlled levels of current required to drive light emitting diodes in diverse applications including mobile backlight units; power management ICs including LDOs, LDO controllers, shunt references, thermal switches, current regulators, and battery charger controllers; and audio CODEC and FM transmitter ICs, which are integral components in portable media players and their associated aftermarket accessories. Leadis currently supplies display drivers supporting the major small panel display technologies, including a-Si and LTPS TFT LCDs, color STN LCDs, and color OLED displays, LED drivers supporting portable backlighting applications, and audio ICs supporting portable media players and aftermarket audio accessories.
Certain statements in this press release including, but not limited to, the features and benefits of Leadis' new LDS6000 and LDS6020 capacitive touch controller ICs and the anticipated market adoption of these products are forward-looking statements that are subject to risks and uncertainties that could cause results to be materially different than expectations. Such risks and uncertainties include, but are not limited to, lack of market adoption for the LDS6000 and LDS6020, delays in ramping these new products into production, delays in the integration of our products into consumer electronic devices, our reliance on third-party manufacturers, general portable electronics and semiconductor industry trends, and other risks detailed from time to time in Leadis' reports filed with the Securities and Exchange Commission including its Form 10-K for the year ended December 31, 2007. Leadis disclaims any obligation to update these forward-looking statements.
Contact Information: Eric S. Itakura Director, Business Development and Investor Relations Leadis Technology, Inc. 408-331-8616 Or, Valerie Beaudett George Cohen Communications, INC. Email: Email Contact Tel: 650.400.7833
