Cadence Introduces Genus Synthesis Solution, Delivering Up to 10X Improvement in RTL Design Productivity

Massively parallel architecture scales linearly beyond 10M instances while improving power, performance and area

SAN JOSE, Calif., June 3, 2015 — (PRNewswire) —  Cadence Design Systems, Inc. (NASDAQ: CDNS) today unveiled the Cadence® Genus™ Synthesis Solution, its next-generation register-transfer level (RTL) synthesis and physical synthesis engine, to address the productivity challenges faced by RTL designers. Genus Synthesis Solution incorporates a multi-level massively parallel architecture that delivers up to 5X faster synthesis turnaround times and scales linearly beyond 10M instances. In addition, the tool's new physically aware context-generation capability can reduce iterations between unit- and chip-level synthesis by 2X or more. This powerful combination enables up to 10X improvement in RTL design productivity.

For more information on Genus Synthesis Solution, please visit www.cadence.com/news/genus.

Key Genus Synthesis Solution features and capabilities include:

  • Massively parallel architecture – The tool performs timing-driven distributed synthesis of a design across multiple cores and machines. All key steps in the synthesis flow leverage both multiple machines and multiple CPU cores per machine.
  • Physically aware context generation – The complete timing and physical context for any subset of a design can be extracted and used to drive RTL unit-level synthesis with full consideration of chip-level timing and placement, significantly reducing iterations between chip-level and unit-level synthesis runs.
  • Unified global routing with Innovus Implementation System – Genus Synthesis Solution and Cadence Innovus Implementation System, a next-generation physical implementation solution, share an enhanced 4X faster timing-driven global router that enables tight correlation of both timing and wirelength to within 5 percent from synthesis to place and route.
  • Global analytical architecture-level PPA optimization – The solution incorporates a new datapath optimization engine that concurrently considers many different datapath architectures across the whole design and then leverages an analytical solver to pick the architectures that achieve the globally optimal PPA. This engine delivers up to 20 percent reduction in datapath area without any impact on performance.

"Processors for automotive and industrial markets are driving higher-levels of integration and complexity.  This requires larger design partitions to deliver the efficiencies and time-to-market demanded by our customers," said Anthony Hill, Director of Processor Technology, Texas Instruments (TI). "The highly-scalable Genus Synthesis Solution from Cadence has enabled more than a 5x improvement in turnaround time, enabling us to realize production-quality timing-driven synthesis of up to three-million instance partitions in less than eight hours."

 "With Genus Synthesis Solution, we see a significant opportunity to improve RTL design productivity and make more aggressive architecture-level optimizations to improve PPA," said Dr. Anirudh Devgan, senior vice president and general manager of the Digital & Signoff Group at Cadence. "Early customers are already deploying the solution in their RTL design flows and reporting significantly better turnaround times and throughput compared to competing solutions."

About Cadence
Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at www.cadence.com.

© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence logo are registered trademarks and Genus and Innovus are trademarks of Cadence Design Systems, Inc. in the United States and other countries. All rights reserved. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
408-944-7039
Email Contact

Genus(TM) Synthesis Solution enables timing debug with physical interconnect knowledge built-in. Cross-probe to the physical viewer to see associated wirelengths, floorplan blockages and estimated routing and extract the chip/block level physical context for use in unit-level RTL design.

 

Cadence Logo.

 

Video - http://origin-qps.onstreammedia.com/origin/multivu_archive/PRNA/ENR/0-Cadence-Genus-Paul-Cunningham.mp4 
Photo - http://photos.prnewswire.com/prnh/20150603/220433 
Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/cadence-introduces-genus-synthesis-solution-delivering-up-to-10x-improvement-in-rtl-design-productivity-300093319.html

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
Web: http://www.cadence.com

Featured Video
Latest Blog Posts
Vijay ChobisaSiemens EDA
by Vijay Chobisa
The Rise of Custom Acceleration
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Nomination Deadline for Phil Kaufman Award and Hall of Fame: June 30
Jobs
Design Verification Engineer for Blockwork IT at Milpitas, California
Senior Post Silicon Hardware Engineer for Nvidia at Santa Clara, California
Hardware Engineer for PTEC Solutions at Fremont, California
Senior DPU System Application Engineer for Nvidia at Santa Clara, California
Upcoming Events
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024
SemiconWest - 2024 at Moscone Center San Francisco CA - Jul 9 - 11, 2024
Flash Memory 2024 Conference & Expo FMS2024 at Santa Clara Convention Center Santa Clara CA - Aug 6 - 8, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise