High-Performance Mobile Communication for New NI CompactRIO Module

SEA launches 3G/4G modules directly linking into NI cRIO-9068

NI Week 2013, Austin/Texas
5 – 8 August 2013
Austin Convention Centre Exhibition Hall

TROISDORF, Germany — (BUSINESS WIRE) — August 6, 2013 — S.E.A. Datentechnik, a long-term National Instruments Alliance Partner, is launching a series of mobile communication modules that are designed specifically for the NI CompactRIO platform equipped with the new Zynq-based NI cRIO-9068 controller. The innovative SEA 9751 and SEA 9754 modules enable users developing monitoring and measurement systems based on CompactRIO to access the entire application remotely. Comprehensive data exchange and even updates of the complete LabVIEW application software can now comfortably be done from anywhere at high speed using minimal energy. Integration and configuration efforts of the module have been minimised thanks to the SEA units that link seamlessly into the NI Linux-based cRIO-9068 controller.

While the SEA 9751 module allows for high-speed data transfer with 3G technology of up to 14 Mbit/s (via HSPA+), the SEA 9754 supports even faster transfer rates based on the 4G standard. With the built-in 4G/LTE chipsets, peak data rates can reach up to 100 Mbit/s.

Both modules come with an embedded GPS receiver to provide detailed geotag information, as well as time stamp data accurate to microseconds, making them particularly well-suited for use in mobile applications or solutions with high-precision timing requirements. Additionally, the units provide a pulse per second (PPS) signal via the backplane or a dedicated front panel connector allowing users to achieve precision timekeeping and time measurement. The built-in backup battery enables the GPS receiver to perform a cold start to be live within a few seconds and, as a result, allows for an almost immediate GPS fix.

Compared to earlier communication modules, the new devices consume up to 25 percent less energy; this is because they integrate seamlessly into the Linux-based real-time operating system (RTOS) of the cRIO-9068 so no longer require their own on-board processor. Another benefit of this is that it makes configuration of the communication parameters and module setup much easier. No additional software for installation and configuration is required as the SEA 9751/9754 units can be configured via a web browser and integrate directly into NI Measurement & Automation Explorer (MAX).

The new SEA 9751/9754 modules not only maintain wireless connection speeds up to fifteen times faster than previous models, with 480 Mbit/s they also allow for nearly five times higher data rates for communication with the CompactRIO platform via the USB uplink port.

The modules are available with an optional mass memory to provide additional storage space of 32 GB for the logging of measurement data. Additionally, there is a spare USB port on the front available for further USB connectivity.

As part of the new offering, SEA offers a range of software drivers and API functions that can be used with NI LabVIEW 2013 development environment.

For more information about S.E.A. products please visit www.sea-gmbh.com.

LabVIEW, CompactRIO, National Instruments and NI are trademarks of National Instruments. National Instruments Alliance Partner program members are business entities independent from NI and have no agency, partnership or joint-venture relationship with National Instruments.

About S.E.A.

S.E.A. Datentechnik GmbH is a specialist in designing, developing and implementing customer-specific test and measurement solutions across all industries. Combining in-depth expertise in the fields of measurement, test and control, electronics and real-time technology as well as in data management, S.E.A. is able to provide test software, measurement equipment and turn-key solutions for the most complex and demanding applications.

The company has been a National Instruments’ Certified Alliance Partner for over 20 years. National Instruments hardware and software products, including CompactRIOTM or LabVIEWTM, as platform for test and measurement systems but also for complete test stands or control centres, are a core component of S.E.A.’s offering. Based on these innovative and well-established technologies, SEA is expanding and complementing the National Instruments portfolio helping design engineers to speed up system development even further. Strong suits include the design of large software architectures, OEM software, distributed systems and embedded/FPGA software with LabVIEWTM and other current software technologies. The LabVIEWTM Localization Toolkit for example is a certified gold-level LabVIEWTM Add-on, which enables the development of multi-language LabVIEWTM programs for global applications.

S.E.A. is an award-winning, well-established system integrator and quality certified by DIN EN ISO 9001:2008.

About The LabVIEW Tools Network

NI Alliance Partners accelerate developer productivity by creating LabVIEW software add-ons and apps that receive a Compatible with LabVIEW certification and are distributed through the LabVIEW Tools Network.

About the NI Alliance Partner Network

From creating and supporting custom-engineered solutions to providing consulting and training services that complement existing offerings, NI Alliance Partners use their areas of expertise to help customers do more with solutions based on NI technology. For more information, visit http://www.ni.com/alliance .

1 | 2  Next Page »
Featured Video
Latest Blog Posts
Vijay ChobisaSiemens EDA
by Vijay Chobisa
The Rise of Custom Acceleration
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Nomination Deadline for Phil Kaufman Award and Hall of Fame: June 30
Jobs
Design Verification Engineer for Blockwork IT at Milpitas, California
Senior Post Silicon Hardware Engineer for Nvidia at Santa Clara, California
Senior DPU System Application Engineer for Nvidia at Santa Clara, California
Hardware Engineer for PTEC Solutions at Fremont, California
Upcoming Events
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024
SemiconWest - 2024 at Moscone Center San Francisco CA - Jul 9 - 11, 2024
Flash Memory 2024 Conference & Expo FMS2024 at Santa Clara Convention Center Santa Clara CA - Aug 6 - 8, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise